deadbolt

Man Door Accessories 48 in. Double Bore

Man Door Accessories 48 in. Double Bore
SKU
COM-MDAK48DB
Man Door Accessories 48 in. Double Bore
SKU
COM-MDAK48DB

$130

You need the following to finish the installation of your 48 in. x 80 in. Cor-weld double bore door. Keep your container home or office comfortable and secure with these easy-to-install accessories. 

Includes:

  • Lever Lockset
  • Deadbolt
  • Door Shoe
  • Gasket
  • Threshold

 

ANSI Standards Meets or exceeds of BHMA/ANSI A 156.2 Series 4000, grade 2(FF-H 106C), 400,000 cycles.

Specifications:

  • Door Range 1-3/8 in. to 1-3/4 in. thickness doors.
  • Backset 2-3/4 in. Standard, 2-3/8 in., 3-3/4 in.  
  • Front 2-1/4 in. x 1-1/8 in., adjustable for flat or beveled doors 1/8 in. in 2 in.
  • Strike ASA strike standard. "T" and full lip strike available on request.
  • Latchbolt 1/2 in. Throw solid brass, reversible for RH or LH applications. UL listed.
  • Latch and Stick Screws 8-32 X 1 in. FPH dual purpose.
  • ANSI Standards Meets or exceeds of BHMA/ANSI A 156.2 Series 4000, grade 2(FF-H 106C), 400,000 cycles.
  • Exposed Trim Wrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
  • Keying 6-pin "C" keyway cylinder, 2 keys per lock.
  • Cylinders & Keyways 6 pin solid brass "C" keyway standard 
  • SL00 US26D

Bore diameter - 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing.

Specifications:

  • Wrought Brass or Stainless Steel.
  • Adjustable 1 3/8 in. (35mm) to 1 3/4 in. (45mm) door thickness.
  • Backset adjustable 2 3/8 in. or 2 3/4 in..
  • Deadbolt faceplate - standard 2 1/4 in. X 1 in. packed with 1/8 in. plastic filler to convert 1 in. face plate to 1 1/8 in. wide door preparations.
  • Bore diameter - 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing.
  • Strike - 1 1/8 in. X 2 3/4 in. square corner.
  • Keyways - 6 pin solid brass "C" keyway standard.
  • LSD01 US26D 

Save on your electricity bills by preventing cold air draft from passing beneath the floor by adding thresholds.

Specifications:

  • Height:1/ 2 in. (12.7mm)
  • Width: 6 in. (152.4mm)
  • CCR2726

Seals the gaps around the top & two sides of a door.  It contains (1) Jamb Header piece and (2) Hinge & Strike Jamb pieces of weatherstrip.

Specifications:

  • Width: 1/4 in. (6.4mm) 
  • Profile Height: 7/8 in.  (22.2mm) 
  • Total Height: 1 1/8 in. (28.6mm)
  • PG-603

Door Shoe is applied to the underside of the door creating a barrier against dust, drafts, light, smoke, and fire without compromising the aesthetics of the door.

Specifications:

  • Width -1 1/4 in. (31.8mm)
  • Profile Height -1 5/16 in. (33.3mm)
  • Total Height with Insert - Approx. 1 7/8 in. (47.6mm)
  • DSR-408

 

ANSI Standards Meets or exceeds of BHMA/ANSI A 156.2 Series 4000, grade 2(FF-H 106C), 400,000 cycles.

Specifications:

  • Door Range 1-3/8 in. to 1-3/4 in. thickness doors.
  • Backset 2-3/4 in. Standard, 2-3/8 in., 3-3/4 in.  
  • Front 2-1/4 in. x 1-1/8 in., adjustable for flat or beveled doors 1/8 in. in 2 in.
  • Strike ASA strike standard. "T" and full lip strike available on request.
  • Latchbolt 1/2 in. Throw solid brass, reversible for RH or LH applications. UL listed.
  • Latch and Stick Screws 8-32 X 1 in. FPH dual purpose.
  • ANSI Standards Meets or exceeds of BHMA/ANSI A 156.2 Series 4000, grade 2(FF-H 106C), 400,000 cycles.
  • Exposed Trim Wrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
  • Keying 6-pin "C" keyway cylinder, 2 keys per lock.
  • Cylinders & Keyways 6 pin solid brass "C" keyway standard 
  • SL00 US26D

Bore diameter - 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing.

Specifications:

  • Wrought Brass or Stainless Steel.
  • Adjustable 1 3/8 in. (35mm) to 1 3/4 in. (45mm) door thickness.
  • Backset adjustable 2 3/8 in. or 2 3/4 in..
  • Deadbolt faceplate - standard 2 1/4 in. X 1 in. packed with 1/8 in. plastic filler to convert 1 in. face plate to 1 1/8 in. wide door preparations.
  • Bore diameter - 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing.
  • Strike - 1 1/8 in. X 2 3/4 in. square corner.
  • Keyways - 6 pin solid brass "C" keyway standard.
  • LSD01 US26D 

Save on your electricity bills by preventing cold air draft from passing beneath the floor by adding thresholds.

Specifications:

  • Height:1/ 2 in. (12.7mm)
  • Width: 6 in. (152.4mm)
  • CCR2726

Seals the gaps around the top & two sides of a door.  It contains (1) Jamb Header piece and (2) Hinge & Strike Jamb pieces of weatherstrip.

Specifications:

  • Width: 1/4 in. (6.4mm) 
  • Profile Height: 7/8 in.  (22.2mm) 
  • Total Height: 1 1/8 in. (28.6mm)
  • PG-603

Door Shoe is applied to the underside of the door creating a barrier against dust, drafts, light, smoke, and fire without compromising the aesthetics of the door.

Specifications:

  • Width -1 1/4 in. (31.8mm)
  • Profile Height -1 5/16 in. (33.3mm)
  • Total Height with Insert - Approx. 1 7/8 in. (47.6mm)
  • DSR-408