door parts

Door Lock & Deadbolt Set

Commercial Door Lock & Deadbolt Set
SKU
CXW-DLDB
Commercial Door Lock & Deadbolt Set
SKU
CXW-DLDB
$95

Need a custom quote?

Keep your shipping container safe and secure with this lock and deadbolt set! Increase your security measures instantly with this two part security system. The lock is used to keep the door lever secure and the deadbolt adds an extra layer of protection by sticking into the steel door frame.

These locks are meets and exceeds ANSI standards and have been tested rigorously. Lock in your order today and start protecting your investments. Investing in a lockset for your container steel door is a smart and cost-efficient decision.

Commercial Door Lock & Deadbolt Set includes:

  • Entry Lever Lock
  • Deadbolt
  • Door Range 1-3/8 in. to 1-3/4 in. thickness door
  • Backset 2-3/4 in. Standard, 2-3/8 in., 3-3/4 in.
  • Front 2-1/4 in. x 1-1/8 in., adjustable for flat or beveled doors 1/8 in. in 2 in.
  • Strike ASA strike standard. "T" and full lip strike available on request
  • Latchbolt 1/2 in. Throw solid brass, reversible for RH or LH applications. UL listed.
  • Latch and Stick Screws 8-32 X 1 in. FPH dual purpose
  • ANSI Standards Meets or exceeds of BHMA/ANSI A 156.2 Series 4000, grade 2(FF-H 106C), 400,000 cycles
  • Exposed Trim Wrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
  • Keying 6-pin "C" keyway cylinder, 2 keys per lock.
  • Cylinders & Keyways 6 pin solid brass "C" keyway standard 
  • SL00 US26D
  • Wrought brass or stainless steel material
  • Adjustable 1 3/8 in. (35mm) to 1 3/4 in. (45mm) door thickness
  • Backset adjustable 2 3/8 in. or 2 3/4 in.
  • Deadbolt faceplate - standard 2 1/4 in. X 1 in. packed with 1/8 in. plastic filler to convert 1 in. face plate to 1 1/8 in. wide door preparations
  • Bore diameter - 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing
  • Strike - 1 1/8 in. X 2 3/4 in. square corner
  • Keyways - 6 pin solid brass "C" keyway standard
  • LSD01 US26D

Keep your shipping container safe and secure with this lock and deadbolt set! Increase your security measures instantly with this two part security system. The lock is used to keep the door lever secure and the deadbolt adds an extra layer of protection by sticking into the steel door frame.

These locks are meets and exceeds ANSI standards and have been tested rigorously. Lock in your order today and start protecting your investments. Investing in a lockset for your container steel door is a smart and cost-efficient decision.

Commercial Door Lock & Deadbolt Set includes:

  • Entry Lever Lock
  • Deadbolt
  • Door Range 1-3/8 in. to 1-3/4 in. thickness door
  • Backset 2-3/4 in. Standard, 2-3/8 in., 3-3/4 in.
  • Front 2-1/4 in. x 1-1/8 in., adjustable for flat or beveled doors 1/8 in. in 2 in.
  • Strike ASA strike standard. "T" and full lip strike available on request
  • Latchbolt 1/2 in. Throw solid brass, reversible for RH or LH applications. UL listed.
  • Latch and Stick Screws 8-32 X 1 in. FPH dual purpose
  • ANSI Standards Meets or exceeds of BHMA/ANSI A 156.2 Series 4000, grade 2(FF-H 106C), 400,000 cycles
  • Exposed Trim Wrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
  • Keying 6-pin "C" keyway cylinder, 2 keys per lock.
  • Cylinders & Keyways 6 pin solid brass "C" keyway standard 
  • SL00 US26D
  • Wrought brass or stainless steel material
  • Adjustable 1 3/8 in. (35mm) to 1 3/4 in. (45mm) door thickness
  • Backset adjustable 2 3/8 in. or 2 3/4 in.
  • Deadbolt faceplate - standard 2 1/4 in. X 1 in. packed with 1/8 in. plastic filler to convert 1 in. face plate to 1 1/8 in. wide door preparations
  • Bore diameter - 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing
  • Strike - 1 1/8 in. X 2 3/4 in. square corner
  • Keyways - 6 pin solid brass "C" keyway standard
  • LSD01 US26D